Our ShorePower Monitor is easy to install on most Onan generators where either you or your installer can identify the following 4 wires/pins on your generator wiring harness.
- Start wire or pin
- Stop wire or pin
- Ground wire or pin
- Run wire or pin
If you cannot identify all 4 of those wires/pin than our unit might not work with your generator.
Because Onan or the after-market installer of your generator might have veered from the typical Onan wiring we cannot be responsible if you or your installer is unable to identify the wiring above prior to purchasing.
We will however give you a full refund (No Questions Asked) if you want to return the unit.